Ford Bronco Wheel and Tire Fitment Guide: 2021 to Present, Sasquatch, Raptor and Classic Broncos

Ford Bronco 4-door on black aftermarket wheels and all-terrain tires

Every 2021-and-newer Ford Bronco except the Raptor uses a 6×139.7 (6×5.5) bolt pattern, a 93.1 mm hub, and M12 x 1.5 studs torqued to 100 lb-ft. The Bronco Raptor uses M14 x 1.5 studs at 150 lb-ft, and fitment databases list a different 6×135 pattern with an 87.1 mm hub, so the wheels do not swap.

The Bronco is two wheel problems wearing one badge. Most of the lineup shares a 6-lug, 6×139.7 hub with the Ranger, so owners expect any Bronco wheel to fit any Bronco. Then a Raptor owner buys a set of Sasquatch take-offs, or a Badlands owner finds a deal on Raptor wheels, and nothing lines up. On top of that, the Sasquatch Package moves the factory offset about an inch outboard and changes what fits under the flares. This guide sorts out which Bronco you have, then covers lug hardware, factory wheel and tire sizes by trim, offsets, what fits on stock, leveled and lifted trucks, what is different on the Raptor, and the basics for classic Broncos. We built it from Ford owner’s manuals and Ford technical specifications, cross-checked against fitment databases. Where a number comes from a database rather than Ford, or Ford’s own documents disagree, we say so.

How we approach a Bronco order: trim and package first, then tire size, then the wheel. Our Ford Bronco wheels and tires page only shows wheels and tires that fit the year and trim you enter, and those results are covered by our 100% Fitment Guarantee. Read this first so you know what to enter, especially on a Raptor or a Bronco that has already been lifted.

What bolt pattern, center bore and lug thread does each Bronco use?

Two hubs, two stud threads, one name. Ford’s owner’s manuals print the stud thread and torque but not the bolt circle or hub diameter. Ford’s 2025 technical specifications print the bolt circle. The center bores, and the Raptor’s bolt pattern, come from fitment databases that agree with each other. We mark each source in the table.

Ford Bronco wheel hardware, 2021 to present
Bronco Model years Bolt pattern Stud thread Center bore Factory lug torque (owner’s manual)
All trims except Raptor (Base through Stroppe, two-door and four-door) 2021–present 6×139.7 (6×5.5) (Ford 2025 tech specs; databases) M12 x 1.5 (Ford manuals) 93.1 mm (databases) 100 lb-ft (135 N·m) in the 2021, 2023, 2024 and 2026 manuals
Bronco Raptor (four-door only) 2022–present 6×135 (databases; Ford does not print it, see note) M14 x 1.5 (Ford manuals) 87.1 mm (databases) 150 lb-ft (204 N·m) in the 2023, 2024 and 2026 manuals

The torque spec is simple and the same every year we checked. The 2026 Bronco owner’s manual lists 100 lb-ft (135 N·m) for the M12 x 1.5 nuts on every Bronco except the Raptor, and a separate Raptor table with M14 x 1.5 nuts at 150 lb-ft (204 N·m). Ford adds two things we agree with: the figures are for clean threads free of dirt and rust, and the nuts get retightened to spec within 100 miles after any wheel disturbance, which covers rotations and flat repairs, not only new wheels. On aftermarket wheels we re-check earlier, at 25 to 50 miles. New wheels seat in.

A note on the Raptor’s bolt pattern, because it matters. Ford’s manuals never print it. The fitment databases we checked all list 6×135 with an 87.1 mm hub, the same layout as the F-150, and Ford Performance lists its standard 6×5.5 Bronco wheel kits as not fitting the Raptor. Ford’s 2025 technical specification sheet, however, prints 5.5/139.7 and a 55 mm offset for every wheel in its table, Raptor and Sasquatch included. Because that same table also gives the Sasquatch wheel +55 mm, which every database lists at +30, we read the sheet as a copy-down error and go with 6×135 for the Raptor. Measure the hub or check the old wheel’s stamping before you order if there is any doubt. Raptor owners can start with our 6×135 wheels and filter for the 87.1 mm bore and M14 hardware.

Everyone else starts with our 6×5.5 wheels. The 93.1 mm hub is smaller than the 106.1 mm Toyota bore and larger than the 78.1 mm GM bore, so many 6×5.5 aftermarket wheels bored for multiple trucks will slide on but need a hub-centric ring to center properly. A ring is cheap. A vibration at 70 mph that nobody can balance out is not.

What wheel and tire sizes came on each Bronco trim?

Sizes below come from Ford’s 2021, 2025 and 2026 technical specifications and owner’s manuals. Ford’s offset column is unreliable for the reasons above, so offsets come from fitment databases that agree with each other. Diameters are Ford’s nominal figures.

Factory wheel and tire sizes, 2021-and-newer Bronco (Ford tech specs; offsets from cross-checked databases)
Trim or package Factory wheel and offset Factory tire Nominal diameter
Base 16 x 7 steel at about +55 mm 255/70R16 all-season 30 in.
Big Bend 17 x 7.5 aluminum at about +55 mm (Ford’s 2025 wheel table says 17 x 8; its 2021 and 2026 tire tables say 17 x 7.5) 255/75R17 all-terrain 32 in.
Black Diamond (series 2021–2024, package from 2025), Free Wheeling and Black Appearance packages 17 x 7.5 steel or aluminum at about +55 mm LT265/70R17 General Grabber all-terrain 32 in.
Outer Banks 18 x 7.5 aluminum at about +55 mm 255/70R18 all-terrain 32 in.
Badlands 17 x 8 aluminum at about +55 mm (one database lists +40) LT285/70R17 BFGoodrich all-terrain (Goodyear mud-terrain optional on 2021 trucks) 33 in.
Sasquatch Package; standard on Wildtrak (2021–2024), First Edition (2021) and Everglades 17 x 8.5 beadlock-capable aluminum at about +30 mm LT315/70R17 Goodyear (Ford lists mud-terrain in 2021, rugged-terrain from 2025) 35 in.
Heritage Edition and Stroppe Edition 17 x 8.5 aluminum (Heritage white dog-dish style; Stroppe matte black, beadlock-capable); offset not confirmed LT315/70R17 rugged-terrain 35 in.
Raptor 17 x 8.5 aluminum, beadlock-capable forged option, at about +34 mm (databases) 37×12.50R17 BFGoodrich KO2 all-terrain 37 in.

The trim names move around, so check your window sticker rather than the badge. Ford’s 2025 Bronco technical specifications notes that Black Diamond became a package on the Big Bend instead of its own series, and added the Stroppe Edition. Wildtrak and Everglades do not appear in the 2025 or 2026 spec sheets. The wheel and tire sizes underneath those name changes have stayed remarkably stable since 2021.

Two Ford notes worth reading before you change tires. First, the 2026 manual warns that if your Bronco has LT315/70R17 tires, they should be replaced with the exact original brand and size, because other combinations can cause running-clearance problems, rubbing, and eventual puncture. We read that as Ford telling Sasquatch owners that its clearance margins are tight with the factory tire, not as a ban on aftermarket 35s. Measure, cycle the suspension, and check at full lock. Second, Ford only approves snow chains on the 255/70R16 and 255/75R17 sizes, 15 mm or less, rear wheels only. If you run 33s or 35s in snow country, plan on a winter tire, not chains.

How do offset and backspacing change what fits on a Bronco?

The Bronco gives you two factory offsets to start from, and they are an inch apart. Non-Sasquatch wheels sit at about +55 mm, which tucks the tire deep in the wheel well. The Sasquatch wheel sits at about +30 mm. Every 25 mm of lower offset moves the tire face out about an inch, so the Sasquatch wheel already pushes the tread roughly an inch closer to the flare than a Badlands wheel of similar width.

Common Bronco wheel offsets and what they do (typical, 17 x 8.5 unless noted)
Offset Approx. backspacing Compared with Sasquatch +30 What it typically suits
+55 mm (non-Sasquatch factory) 6.9 in. on 17 x 8.5; 6.4 in. on Ford’s 17 x 7.5 About 1 in. farther in Factory tires up to 33s on stock suspension
+30 mm (Sasquatch factory) 5.9 in. Baseline 35s on Sasquatch trucks; factory look
+12 to +18 mm 5.2 to 5.5 in. About 0.5 to 0.7 in. farther out 35s with the tread near the flare edge
0 mm 4.75 in. About 1.2 in. farther out 35s to 37s with a lift; the most common aftermarket Bronco spec
-12 mm on 17 x 9 4.5 in. About 1.9 in. farther out at the outer lip 37s with a lift; more poke and more rub risk at flex

Lower offset is not free. It adds leverage on the wheel bearings and steering, makes the tire contact the flare and bumper end caps sooner when the suspension compresses, and on the Bronco’s removable-door, open-fender layout it throws more mud and rock at the body. Our rule: pick the offset the tire needs to clear the upper control arm and front frame, not the one that looks best on a parked truck. Run your exact wheel through our wheel offset and backspacing calculator before you commit.

Width matters too. A 17 x 9 at -12 mm puts the outer lip almost two inches farther out than the Sasquatch wheel. About a quarter inch of that comes from the extra width; the rest is offset. If you want the 35s stretched less and the sidewall protecting the rim on rocks, an 8.5-inch wheel is the better trail choice. A 9-inch wheel suits a 37 better than a 35.

What size tires fit a Bronco on stock suspension, a leveling kit and a lift?

Ford answers the stock question for you on two trucks: the Badlands comes on 33s, and the Sasquatch Package comes on 35s because it adds high-clearance suspension and high-clearance fender flares. Everything past that is aftermarket territory, and the numbers below are what typically works in our experience and in owner build data, not a guarantee. Bumpers, flares, alignment and how hard you flex the truck all move the line.

Typical Bronco tire sizes by suspension setup (not guaranteed)
Setup Typical tire size Typical wheel What usually goes with it
Stock, non-Sasquatch Up to about 33 in. (for example 285/70R17) 17 x 8 to 17 x 8.5 at +30 to +55 mm Usually nothing; possible light contact at full lock with lower offsets
Stock, Sasquatch (or Heritage, Stroppe) 35 in. (LT315/70R17 or 35×12.50R17) Factory 17 x 8.5 at +30 mm, or about 0 to +18 mm aftermarket Nothing at factory offset; check flare clearance at lower offsets
Non-Sasquatch, leveled or lifted about 1.5 to 2 in. 35 in. 17 x 8.5 to 17 x 9 at about 0 to +30 mm High-clearance flares or trimming are common; bump stop review
Sasquatch, lifted about 1.5 to 3 in. 37 in. 17 x 8.5 to 17 x 9 at about 0 to -12 mm Bump stop spacers, flare and bumper end-cap clearance, alignment, gearing review
Raptor, stock 37 in. (37×12.50R17 factory) Factory 17 x 8.5 at about +34 mm, or Raptor-specific aftermarket Nothing; going larger is a project, not a bolt-on

If 33s are the goal, our 285/70R17 tires page is where most stock Badlands and non-Sasquatch owners land. Taller and wider than the factory Big Bend or Outer Banks tire, but it stays inside what Ford already fits on a stock Bronco.

For 35s, the Sasquatch truck is the easy case. Keep the factory wheel or step to an aftermarket wheel in the 0 to +18 mm range, and the main question is how far out you want the tread: tucked, or at the flare. On a non-Sasquatch truck, the Sasquatch hardware is the template: more ride height, flares that clear, and a lower offset wheel. Our 35-inch tires page is the place to compare them.

For 37s outside the Raptor, plan the whole build, not the tire. A 37-inch tire on a Bronco built for 35s puts more load on the brakes, the axles, and the steering, and the Sasquatch Package pairs its 35s with a 4.7 final drive ratio, not a ratio sized for 37s. We would rather sell you the lift, the wheel and the tire as a matched set than a set of 37s that rubs the first time the front axle stuffs. Start with our 37-inch tires page once the suspension plan is settled.

One more Ford-documented effect of bigger tires: the roof. Ford’s 2025 and 2026 spec sheets list a 450 lb static roof rating that is not available on trucks with the 35-inch tire, and the owner’s manual roof-rack table lists 0 lb for trucks on the factory 37s. If a rooftop tent is part of the plan, read your own manual’s roof load table before you size the tires.

What is different about Bronco Raptor wheels and tires?

Nearly everything that touches the hub. The Raptor runs M14 x 1.5 studs at 150 lb-ft instead of M12 x 1.5 at 100, and fitment databases list a 6×135 pattern and an 87.1 mm bore instead of 6×139.7 and 93.1. Ford’s 2026 Bronco technical specifications list a 73.2 inch front and 73.6 inch rear track on the Raptor, against 65.0 inches on Base, Big Bend, Outer Banks and Badlands trucks and 66.9 inches on the Heritage and Stroppe Editions. The factory wheel is a 17 x 8.5, with a forged, beadlock-capable version optional, on 37×12.50R17 BFGoodrich KO2 all-terrain tires.

What that means at the counter: a standard Bronco wheel will not bolt onto a Raptor, and a Raptor wheel will not bolt onto a standard Bronco. Adapters exist. We do not recommend them on a Bronco that sees trails, because they add width and leverage and one more joint to come loose. On paper, the Raptor’s pattern, bore and thread line up with the F-150 according to the databases we use, which is why many 6×135 wheels list Bronco Raptor fitment. Offset and load rating still have to be checked wheel by wheel. Our F-150 wheel and tire fitment guide covers the 6×135 side in more depth.

Water fording follows the tire size in Ford’s numbers: 31.5 inches on most trucks, 33.5 inches with the Sasquatch Package, and 37.0 inches on the Raptor. Maximum ground clearance runs from about 8.3 to 8.4 inches on a Base, to 11.5 to 11.6 inches with 35s, to 13.1 inches on the Raptor.

Will Sasquatch, Ranger, Wrangler or F-150 wheels fit a Bronco?

Bronco wheel interchange at a glance (databases unless noted)
Donor wheel Fits a non-Raptor Bronco? Fits a Bronco Raptor? What to check
Bronco Sasquatch 17 x 8.5 Yes; same pattern, bore and thread No About 1 in. more poke than the +55 mm wheels; TPMS
Non-Sasquatch Bronco factory wheel Yes No Offset tucks larger tires toward the control arm
Ford Ranger (2019 and newer) Bolt pattern, 93.1 mm bore and M12 x 1.5 match per databases No Offset and load rating for the Bronco’s weight
Jeep Wrangler or Gladiator No; 5×127 No Different pattern; adapters not recommended
Ford F-150 (2004 and newer) No; 6×135 Pattern, bore and thread match per databases Offset, load rating, brake clearance
Toyota Tacoma, 4Runner (6×139.7) Bolts on, not a direct fit; Toyota bores are 106.1 mm or 95.1 mm and factory Toyota wheels use flat-seat nuts No Hub-centric ring, M12 x 1.5 nuts with the right seat, offset

The Wrangler is the one people ask about most, because the trucks get cross-shopped. They share nothing at the hub. The Wrangler and Gladiator are 5×127 with a 71.5 mm bore, so wheels and packages are model-specific. Our Jeep Wrangler wheel and tire fitment guide covers that side if you own one of each.

What do I need for TPMS, lug nuts and driver-assist systems on a Bronco?

TPMS first. Ford’s 2021, 2024 and 2026 Bronco manuals all say the factory tire pressure sensors are not designed to be used in aftermarket wheels. Some installers move them anyway when the valve stem seats properly in the new wheel. We would rather quote a new sensor set with aftermarket wheels and leave the factory sensors in the factory wheels, which also keeps that set ready to sell or swap back. Our post on whether your old TPMS sensors can move to new wheels covers the trade-offs.

A working system is not optional. Federal rules under FMVSS 138 require a tire pressure monitoring system on light vehicles, and the warning light should be off after the first drive on the new set.

Lug nuts second. Most aftermarket wheels need a 60-degree conical-seat nut in M12 x 1.5 for non-Raptor trucks, or M14 x 1.5 for the Raptor, and the wheel’s spec sheet is the final word on seat type. Do not reuse factory nuts on an aftermarket wheel without checking the seat. Our answer on whether aftermarket wheels need special lug nuts explains how to tell. Torque to Ford’s figure: 100 lb-ft non-Raptor, 150 lb-ft Raptor.

Driver-assist last. Ford’s 2026 manual warns that unapproved modifications that change the vehicle’s height or suspension can shift the driver-assist sensors out of the position they were designed and tested in. A lift and bigger tires change ride height, so plan on a sensor and alignment check after the install, and have the speedometer recalibrated for the new tire diameter. Going from the factory 32-inch tire to a 35 changes the reading by about 9 percent if nothing is recalibrated.

What bolt pattern do classic Ford Broncos (1966 to 1996) use?

Fitment databases list 5×139.7 (5×5.5) with 1/2-20 studs for every full-size Bronco, from the 1966–1977 early Bronco through the 1978–1979, 1980–1986, 1987–1991 and 1992–1996 trucks. That is a 5-lug pattern. A classic Bronco wheel will not fit a 2021-and-newer Bronco, and a new Bronco wheel will not fit a classic. Center bores and hub designs vary with the axle, so measure the hub before you order. We could not find a Ford owner’s manual for these trucks online, so we do not quote a torque figure here; use your shop manual.

Classic Bronco and Bronco-named models: bolt pattern basics (databases)
Vehicle Years Bolt pattern Notes
Early Bronco 1966–1977 5×139.7 (5×5.5) 15-inch wheels; databases list 15 x 5.5 at about 0 mm
Full-size Bronco 1978–1996 5×139.7 (5×5.5) 15-inch wheels; the 1992–1996 listing shows 235/75R15 on 15 x 7 at about +10 mm
Bronco II (compact, Ranger-based) 1984–1990 5×114.3 (5×4.5) per databases (confirm) A different vehicle; nothing interchanges with the full-size Bronco
Bronco Sport 2021–present 5×108 per databases A different, car-based vehicle; no wheel interchange with the Bronco

Classic owners usually want the look first: 15-inch wheels with a lot of sidewall. That is fine, and it is often what works best on the old drum-and-early-disc brake packages, but check caliper clearance on any truck that has had a modern brake swap.

What should I check before ordering Bronco wheels and tires?

Run through this list in order. Steps 1 and 5 are where a Raptor or a Sasquatch truck usually gets mixed up with the rest of the lineup.

  1. Identify the year, trim and package. Note the model year, two-door or four-door, the trim (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage, Stroppe or Raptor), whether it has the Sasquatch Package, and any lift or leveling kit.
  2. Read the door placard. Write down the factory tire size, load range, and cold inflation pressure. Replacement tires should not have a lower load capacity than the originals, and the wheel’s load rating should cover the Bronco and its gear.
  3. Choose the tire size first. Decide on the tire for how you use the Bronco, then the suspension it typically needs: stock for about 33 inches on a non-Sasquatch truck, Sasquatch or a lift with flares for 35s, and a lift with supporting parts for 37s outside the Raptor.
  4. Pick wheel diameter, width and offset for that tire. Start from your truck’s factory offset (about +55 mm non-Sasquatch, about +30 mm Sasquatch, about +34 mm Raptor per fitment databases), run the numbers in an offset and backspacing calculator, and check caliper clearance on 17-inch wheels.
  5. Confirm bolt pattern, center bore and lug hardware. Match 6×139.7 with a 93.1 mm hub and M12 x 1.5 nuts on non-Raptor trucks, or the Raptor’s M14 x 1.5 hardware and 6×135 pattern. Use a hub-centric ring if the wheel bore is larger than the hub and buy nuts with the seat the wheel calls for.
  6. Plan TPMS. Order new sensors for aftermarket wheels, since Ford says the factory sensors are not designed for them, then confirm the TPMS light is off after the first drive.
  7. Plan driver-assist and speedometer checks. If the lift height or tire size changes, read the aftermarket modifications note in your owner’s manual about sensor position, and have the tire size recalibrated if the speedometer reads off.
  8. Install, torque and re-check. Torque the nuts in a star pattern with a torque wrench to 100 lb-ft (non-Raptor) or 150 lb-ft (Raptor), retighten within 100 miles as Ford specifies (we re-check at 25 to 50 miles), and get an alignment if lift, tire size or offset changed.

If you would rather have it done once, our wheel and tire packages arrive mounted and balanced with the sensors and hardware matched to your Bronco, ready to bolt on.

Should I buy Bronco wheels alone or a mounted package?

Wheels only vs. mounted package for a Bronco
Wheels only Mounted wheel and tire package
Best for Keeping tires you already like, or a shop you trust for mounting 35s and 37s, new TPMS, or a first aftermarket setup
Shipping window (WheelsASAP) Wheels ship in 2–4 business days Packages ship in 4–8 business days
Who checks fitment Our 5-point check covers the wheel Our 5-point check covers the wheel, and the tire is matched to it
Arrives Wheels, ready for your installer Mounted, balanced, ready to bolt on

Every order we fit gets the same 5-point check under our 100% Fitment Guarantee: bolt pattern, offset, center bore, width and brake clearance. On a Bronco, that check is built to catch a Raptor entered as a standard truck. We ship to the lower 48 states, and the return window is 60 days.

If spreading the cost of a 35-inch package makes sense, our guide on how to finance wheels and tires covers how the options work.

Frequently asked questions about Ford Bronco wheel fitment

What is the bolt pattern on a 2021-and-newer Ford Bronco?

6×139.7, also written 6×5.5, on every 2021-and-newer Bronco except the Raptor. Ford’s 2025 technical specifications list a 5.5-inch (139.7 mm) bolt circle with six studs. Fitment databases list a 93.1 mm center bore. The Bronco Raptor is the exception: databases list 6×135 with an 87.1 mm hub.

What is the lug nut size and torque on a Ford Bronco?

Ford’s owner’s manuals list M12 x 1.5 wheel nuts torqued to 100 lb-ft (135 N·m) on every Bronco except the Raptor. The Raptor has its own table: M14 x 1.5 nuts at 150 lb-ft (204 N·m). Ford says to retighten to spec within 100 miles after any wheel removal, rotation, or flat repair.

Do Bronco Raptor wheels fit a regular Bronco?

No. The Raptor uses M14 x 1.5 studs, and fitment databases list a 6×135 bolt pattern and an 87.1 mm hub, against 6×139.7, 93.1 mm and M12 x 1.5 on other Broncos. Ford Performance lists its standard Bronco wheel kits as not fitting the Raptor. Neither wheel bolts onto the other truck without adapters, which we do not recommend.

What size are the Sasquatch wheels and tires?

The Sasquatch Package uses a 17 x 8.5 beadlock-capable aluminum wheel with LT315/70R17 tires, which Ford calls 35-inch. Fitment databases list the Sasquatch wheel at +30 mm offset, against about +55 mm on non-Sasquatch factory wheels. The package also adds high-clearance suspension and fender flares, which is why 35s fit.

What size tires fit a stock non-Sasquatch Bronco?

Ford’s own Badlands runs LT285/70R17, about 33 inches, on a 17 x 8 wheel, so 33-inch tires are the practical stock ceiling on a non-Sasquatch Bronco. 35s usually need a lift or leveling kit, high-clearance flares or trimming, and a lower offset wheel. Treat this as typical shop guidance, not a guarantee.

Can I put 37-inch tires on a Bronco?

The Bronco Raptor comes on 37×12.50R17 tires from Ford. On a Sasquatch Bronco, 37s typically need a lift in the 1.5 to 3 inch range, bump stop or flare work, and a wheel at about 0 to -12 mm offset, plus a gearing and brake review. Treat this as typical, not guaranteed, and check clearance at full lock and full compression.

Can I reuse my Bronco’s factory TPMS sensors on aftermarket wheels?

Ford’s 2021, 2024 and 2026 Bronco owner’s manuals say the factory tire pressure sensors are not designed to be used in aftermarket wheels. Some shops move them anyway when the valve stem seats correctly, but we quote new sensors with aftermarket wheels and leave the factory set intact on the original wheels.

What bolt pattern do classic Ford Broncos use?

Fitment databases list 5×139.7 (5×5.5) with 1/2-20 studs on every full-size Bronco from 1966 through 1996. That is a 5-lug pattern, so classic Bronco wheels do not fit a 2021-and-newer Bronco. The Bronco Sport is a different vehicle on a 5×108 pattern according to the databases we checked.

Talk to a Bronco fitment specialist

Tell us the year, trim, package, and any lift, and we will tell you what fits and what it takes. Call 1-866-757-4679, Monday through Friday, 8:30 AM to 6:00 PM Eastern. If you cannot tell if it is a Sasquatch truck or which wheel is on it now, a photo of the door placard and the back of a wheel answers most of it.

Sources: Ford Bronco owner’s manuals for 2021, 2023, 2024 and 2026 for stud thread, torque, TPMS, tire and chain notes; Ford’s 2025 and 2026 Bronco technical specifications for wheel and tire sizes, track width, fording and clearance; fitment databases for center bores, the Raptor bolt pattern and offsets.